Seeing the invisible: How x-ray revealing spatter behavior during 3D printing

The research conducted by UCL researchers reveals and explains the links between vapour depression shape and spatter dynamics during LPBF under various industry-relevant processing conditions.

This work, reported in the International Journal of Extreme Manufacturing, not only quantifies the spatter and spatter-laser interactions but also proposes strategies to minimize defects, thereby enhancing the surface quality of LPBF-manufactured parts.

Spatter during LPBF can induce surface defects, impacting the fatigue performance of the fabricated components. "Spatter is one of the main concerns in industrial 3D printing application that can contribute to porosity formation and rough surface." said Chu Lun Alex Leung, the corresponding author on the paper and Associate Professor in UCL Mechanical Engineering.

"Adoption of LPBF for safety critical applications is hindered by the challenge of achieving defect-lean, high surface quality metallic components." Professor Peter D. Lee, also a corresponding author and Professor in UCL Mechanical Engineering, emphasized, "Currently, research on spatter during LPBF is limited, and our goal is to improve our understanding of spatter formation mechanisms using high-energy synchrotron X-ray sources."

LPBF is a leading metal 3D printing technology, with the potential to produce components that surpass traditional castings in defect levels and mechanical properties when appropriate process parameters are used. However, they may not currently reach the surface quality and defect levels of components machined from wrought products. Reduced defects (or roughness) in the surface regions should bring further improvements on the fatigue performance of the LPBF components.

The surface defects are often associated with spatter formation during LPBF. Oversized spatter can adhere to the surface of AM parts, increasing both surface defects and roughness; they can also be trapped in the powder bed in subsequent build layers, leading to lack-of-fusion porosities. Spatter may undergo oxidation, which lowers the recyclability and reusability of powder. The surface oxides can inhibit particle fusion and promote the formation of porosity, decreasing the density of the LPBF parts. Hence, a deeper understanding of spatter evolution is therefore essential to mitigate these issues.

The experiments were performed using bespoke AM machine, called the Quad-laser in situ and operando process replicator (Quad-ISOPR). The Quad-ISOPR comprises four lasers and the industrial scan head system combined with a custom-built environmental chamber filled with argon shielding gas. A substrate with a 1 mm through-thickness and 15 mm height is mounted in the chamber, onto which a thin layer of the powder is automatically deposited.

Using in situ high-speed synchrotron X-ray, both spatter and melt pool dynamics during LPBF can be captured at exceptional spatial and temporal resolution. The in situ experiments were carried out at the European Synchrotron Radiation Facility's (ESRF) high-speed imaging beamline ID19, using polychromatic hard x-ray beam with a mean energy of ∼30 keV and a high-speed camera at a framerate of 40 kHz.

"Our work predicts the number of spatters formed during LPBF of an Al-Zr-Fe alloy system," said first-author Da Guo, post-doc in the school. “This prediction can be used for future model validation and minimizing spatter.”

The researchers are continuing their efforts to deepen the understanding of spatter formation across various commercial materials in 3D printing applications, with the goal of achieving higher surface quality LPBF parts for real-world use. Through these advancements, they hope to contribute significantly to the broader adoption of LPBF in industry, particularly in applications where component integrity is critical.

About IJEM:

International Journal of Extreme Manufacturing (IF: 16.1, consecutive 1st in the Engineering, Manufacturing category) is a new multidisciplinary and open-access and double anonymous peer-reviewed journal uniquely covering the full spectrum of extreme manufacturing.

The journal is devoted to publishing original articles and reviews of the highest quality and impact in the areas related to the science and technology of manufacturing functional devices and systems with extreme dimensions (extremely large or small) and/or extreme functionalities, ranging from fundamental science to cutting-edge technologies that support the manufacturing of high-performance products involving emerging techniques and breaking the limits of currently known theories, methods, scales, environments, and performance.

Visit our webpage, Like us on Facebook, and follow us on Twitter and LinkedIn.