New catalyst developed to revolutionize hydrogen production from greenhouse gases, overcoming durability limits
KIER has developed a highly durable and stable self-generating catalyst for dry reforming reactions
image: Group photo of the research team (from left Sojung Kim, Yoonseok Choi, Heeyeon Kim, Seongwoo Nam, WooChul Jung)
Credit: KOREA INSTITUTE OF ENERGY RESEARCH(KIER)
Researchers Dr. Heeyeon Kim and Dr. Yoonseok Choi from the High Temperature Electrolysis Laboratory at the Korea Institute of Energy Research (KIER, President Yi, Chang-Keun), in collaboration with Professor WooChul Jung from the Department of Materials Science and Engineering at Seoul National University, have successfully improved a catalyst used in dry reforming reactions* that produce energy from greenhouse gases. The newly developed self-generating catalyst offers high durability and significantly reduces metal usage compared to conventional catalysts, greatly enhancing economic efficiency.
|
* Dry Reforming of Methane (DRM): A technology that reacts methane and carbon dioxide—two major greenhouse gases—at high temperatures to produce syngas. In recent years, it has also gained attention as a core technology for distributed hydrogen production linked with hydrocarbons, as well as for integrated power generation systems with solid oxide fuel cells. |
Dry reforming is a technology that reacts methane (CH₄) and carbon dioxide (CO₂)—both major greenhouse gases—at high temperatures to synthesize hydrogen (H₂) and carbon monoxide (CO). By reducing greenhouse gases, it helps combat global warming while producing hydrogen, a key energy source, and versatile syngas. For these reasons, it has been an active area of research in both academia and industry.
Dry reforming reactions typically use nickel (Ni) catalysts, which are both cost-effective and high-performing. However, during the reaction, carbon tends to deposit on the catalyst surface, leading to a rapid decline in performance. This coke deposition is a major obstacle to long-term operation and commercialization, driving active research into new catalyst designs and optimization of operating conditions.
As an alternative, self-generating catalyst technology using perovskite-based oxides has been getting a lot of attention. In this approach, the metal resides within the catalyst support , migrates to the surface to form catalytic active sites under reaction conditions. The metal particles that emerge bond strongly with the support, effectively suppressing carbon deposition. As a result, compared to conventional nickel catalysts, self-generating catalysts can maintain performance over long-term operation.
|
* Self-Generating Catalyst: A catalyst in which the active metal component is embedded within the crystal lattice of the support material and migrates to the surface under specific environment. This mechanism allows active sites to be evenly distributed across the catalyst surface and fundamentally prevents performance degradation caused by metal particle detachment or agglomeration. |
The research team optimized the interatomic bonding strength to develop a self-generating catalyst that operates stably even under the high-temperature conditions of dry reforming reactions. Using this catalyst, the same amount of syngas can be produced with only about 3% of the nickel required by conventional catalysts.
In self-generating catalysts, the easier it is for the internal metal elements to migrate to the surface, the faster the reaction rate. However, the lanthanum manganite (LaMnO₃)-based perovskite oxide support used in this study had strong interatomic bonds, making it difficult for the internal metal particles to emerge. To address this, the research team substituted lanthanum ions (La³⁺) in the oxide support with calcium ions (Ca²⁺), reducing the interatomic bonding strength and enabling a greater amount of nickel to migrate to the catalyst surface.
However, the team found that adding an excessive amount of calcium could cause the perovskite structure itself to collapse, leading to reduced catalyst stability and activity. Based on this finding, they determined the optimal range of calcium substitution and successfully developed a self-generating catalyst that operates stably while offering high resistance to carbon deposition and strong reforming activity.
When compared with conventional catalysts, the newly developed catalyst required only about 3% of the nickel to produce the same amount of syngas. Moreover, unlike conventional catalysts, whose activities are easily reduced by agglomeration and coking, the new catalyst maintained high conversion efficiency stably for 500 hours of long-term operation at 800 °C, with no signs of carbon deposition—demonstrating its outstanding durability.
Dr. Heeyeon Kim, the lead researcher, stated, “The self-generating catalyst technology is a groundbreaking innovation that not only effectively resolves the catalyst deactivation issues mainly by coke deposition of conventional nickel catalysts but also significantly reduces the costs of raw materials and reaction processes.”
Dr. Yoonseok Choi, co-corresponding author of the paper, commented, “This work is highly significant as it has secured a core technology applicable not only to dry reforming reactions but also to a wide range of hydrocarbon reforming processes, high-temperature water electrolysis (SOEC), and other next-generation energy conversion systems.”
The research findings were published in ACS Catalysis (Impact Factor: 13.1), a leading international journal in the field of catalysis, and were supported by KIER’s Research Program and the Research Program of the Ministry of Science and ICT.